Star Tech Development TSP100 - Manual (Page 20)

– 17 –
Power switch
3-7. Turning Power On
Make sure that the Power cord has been connected as described in 3-6.
(1) Turn ON the power switch located on the front of the printer.
The POWER lamp on the control panel will light up.
CAUTION
We recommend that you unplug the printer from the power outlet whenever you do not plan to use
it for long periods. Because of this, you should locate the printer so that the power outlet it is
plugged into is nearby and easy to access.
When an Switch cover is affixed to the printer above the power switch, the ON/OFF marks of the
power switch may be hidden. If this occurs, remove the power cord from the outlet to turn the
printer OFF.
Note: The dialog shown below may appear on your PC screen if your PC is running Windows
98 or Me, and if you turn ON the power of the printer for the first time while the PC and
the printer are connected with the USB/PoweredUSB cable. In this case, refer to the
software manual on the CD-ROM, in the following directory: Documents folder.