Star Tech Development TSP100 - Manual (Page 8)

– 5 –
2-3. Choosing a place for the printer
Before actually unpacking the printer, you should take a few minutes to think about where
you plan to use it. Remember the following points when doing this.
✓ Choose a firm, level surface where the printer will not be exposed to vibration.
✓ The power outlet you plan to connect to for power should be nearby and unobstructed.
✓ Make sure that the printer is close enough to your host computer for you to connect the
two.
✓ Make sure that the printer is not exposed to direct sunlight.
✓ Make sure that the printer is well away from heaters and other sources of extreme heat.
✓ Make sure that the surrounding area is clean, dry, and free of dust.
✓ Make sure that the printer is connected to a reliable power outlet. It should not be on the
same electric circuit as copiers, refrigerators, or other appliances that cause power
spikes.
✓ Make sure that the room where you are using the printer is not too humid.
WARNING
✓ Shut down your equipment immediately if it produces smoke, a strange odor, or unusual
noise. Immediately unplug the equipment and contact your dealer for advice.
✓ Never attempt to repair this product yourself. Improper repair work can be dangerous.
✓ Never disassemble or modify this product. Tampering with this product may result in
injury, fire, or electric shock.