Star Tech Development TSP100 - Manual (Page 23)

– 20 –
4-3. Switch Cover Installation
It is not necessary to install the switch cover. Only install it if it is necessary for you. By installing
the switch cover, the following become possible.
• Preventing the power switch from being operated by mistake.
• Ensuring that other people can not easily operate the power switch.
Install the switch cover as shown in the diagram below.
The power switch can be turned ON ( !) and OFF (O) by inserting a narrow instrument (ball pen
etc.) in the holes in the switch cover.
CAUTION
We recommend that you unplug the printer from the power outlet whenever you do not plan to use
it for long periods. Because of this, you should locate the printer so that the power outlet it is
plugged into is nearby and easy to access.