Setting the security code, Highlight and select “rf, Highlight and select “return – Sony SAT-B50 User Manual
Page 32: Highlight and select “rf security code
32
Setting the Security Code
If the Digital Satellite Receiver is receiving signals from another RF
remote control in your home (or from your neighbor’s home), you can
eliminate this problem by changing the security codes for the Digital
Satellite Receiver and remote control, or by selecting IR control.
Both the Digital Satellite Receiver and the remote control must use the
same three digit security code.
1
Select “Remote Control” from the SYSTEM pop-up (see
page 31).
The Remote Control display appears.
2
Highlight and select “RF Security Code”.
The confirmation pop-up appears.
4
Highlight and select “RF”.
The Remote Signal pop-up closes to show the Remote Control
display.
5
Highlight and select “Return”.
The display closes to show the Main Menu, and the Digital Satellite
Receiver is set to receive RF signals from the remote control.
+
SATELLITE
RECEIVER
2
8
3
4
5
6
9
SLEEP
TV/SAT TV/VIDEO
FUNCTION
CABLE
AUDIO
VOLUME
ENTER
DISPLAY
MUTING
CABLE
ALT AUDIO JUMP
GUIDE
INDEX
FAVORITE
VOL
RM-Y802
VTR3 2 DVD AMP
MENU
EXIT
CH
1
7
TV
TV
CATEGORY
CODE SET
0
POWER
SAT
MENU
Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)