Sony SAT-B50 - Manual (Page 70)

70
SAT-B50 Back Panel
1 ACCESS CARD slot
Do not remove the Access Card unless instructed
to do so by your service provider.
2 SATELLITE IN jack
Inputs satellite signals from your Satellite Dish
Antenna using RG-6 coaxial cable.
3 CH3/CH4 switch
When you use an RF connection (VHF(SAT)/
UHF OUT jack), this setting determines the TV
channel on which programs from the Digital
Satellite Receiver can be viewed.
4 VHF/UHF IN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
5 AC IN jack
Inputs AC power from a power outlet using the
AC Power Cord.
6 TEL LINE jack
Connects the Digital Satellite Receiver to a
telephone outlet using a telephone line cable.
7 VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UHF input on your TV or VCR using coaxial
cable.
8 A/V OUTPUT jacks
Output audio and video signals to your TV and
other audio/video equipment using A/V cables.
9 LOW SPEED DATA
For future application.
q; VCR CONTROL jack
Allows the VCR Controller to control a VCR and/
or cable box. Also allows connection of a
monaural cable for use with Sony SmartFile
VCRs.
ACCESS CARD
LOW SPEED DATA
VCR CONTROL
SATELLITE IN
R L(MONO)
VIDEO OUT
AUDIO VIDEO
S VIDEO
CH3
CH4
VHF/UHF IN
VHF(SAT)/UHF
OUT TEL LINE
AC IN~
1
2
1 2 3 4
6 5 7 8 9 q;
Location and Function of Controls (continued)