Sony SAT-B50 - Manual (Page 65)

65
O
the
r
Inf
o
rma
tio
n
The RM-Y139 and RM-Y802 remote controls can be programmed to
operate your other audio/video equipment.
+
SATELLITE
RECEIVER
2
8
3
4 5 6
9
SLEEP TV/SAT TV/VIDEO
FUNCTION
SAT CABLE
AUDIO
VOLUME
ENTER DISPLAY
MUTING
CABLE
ALT AUDIO JUMP
GUIDE INDEX FAVORITE
VOL
RM-Y802 VTR3 2 DVD AMP
MENU
EXIT
CH
1
7
TV
TV
CATEGORY
CODE SET
0
POWER
SAT
z Tip
Remember to aim the remote control at
the device you are trying to operate.
1 Find the code(s) for the manufacturer of the
device you want to operate with this remote
control.
You can find these codes on pages 66 and 67.
2 Press the CODE SET button.
All function indicators begin flashing.
3 Press the FUNCTION button for the device you
want to operate with this remote control.
The function indicator for only that device begins flashing.
You can set up the RM-Y802 remote control to operate extra
devices by sliding the device switch to VTR3, 2, DVD, or AMP and
pressing the CABLE FUNCTION button.
4 Press the 0–9 buttons to input the manufacturer
code, then press the ENTER button.
The function indicator goes off, and the remote is setup to operate
that device.
5 Test the remote control.
Press the POWER button for that equipment, then press other
operation controls such as the CH +/– buttons.
If the device does not respond to the remote control, repeat from
step 2 and enter a different manufacturer code in step 4.
CODE SET
FUNCTION
SAT CABLE TV
/
TV
FUNCTION
CABLE
FUNCTION
FUNCTION
TV
FUNCTION
CABLE
/
1 0 1 ENTER
Other Information
Setting Up the Remote Control