Sharp DT-300 - Manual (Page 16)

Connections and Setup
-15
Connecting to Video Equipment
S-video cable (commercially available)
To S-video output terminal
To INPUT 3 terminal
VCR or other video equipment
Connecting to Video
Equipment Using an
S-video Cable (INPUT 3)
Using an S-video cable, a VCR, DVD player or
other video equipment can be connected to
INPUT 3 input terminal.
1
Connect an S-video cable to
the projector.
2
Connect the S-video cable to
the video equipment.
Note
• The INPUT 3 (S-VIDEO) terminal uses a
video signal system in which the picture
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
03.10.29, 2:39 PM Page 15