Sony KD-32NX200U - Manual (Page 11)

Basic operation
9
Overview of the remote control buttons
Mute button
Press to mute the sound. Press again to
restore. VIDEO button
Press to switch off your VCR or DVD
temporarily. Press again to resume normal
operation.
/
TV button
Press to switch off your TV temporarily. The red
indicator on the front of the TV illuminates.
Press again to resume normal operation.
/
DIGITAL/ button
Press to switch between digital and analogue
mode.
Screen format button
Press repeatedly to change the screen format.
Input button /Hold button
Press to select signals from equipment
connected to the TV sockets (refer to
‘Connecting other equipment to the TV’).
In text mode press to keep a page on display.
Press again to cancel.
Buttons 0 - 9
Press to input the required channel number.
For numbers 10 and above, enter the second
digit within 2 seconds.
Previous channel button
While watching Analogue TV pressing this
button will return you to the previous channel
you were watching.
While watching Digital TV pressing this button
can also act as an ‘EXIT’ key and cancel any
Digital text application that may be running.
MODE button
This remote operates not only Sony DVDs and
VCRs, but also those made by other
manufacturers. Press this button repeatedly to
select the type of equipment you want to
control. A green light appears momentarily to
indicate the mode selected.
Note:
Before operating your VCR or DVD, you must enter
the correct configuration code. Please refer to the
section ‘Remote control operation for VCR and DVD
players’.
GUIDE button
Press to launch digital text or digital interactive
services.
Text button
Press to enter the text mode.
EPG button
Press to display the Electronic Programme
Guide when in digital mode.
Coloured buttons
These buttons are used for the text and digital
menus. Refer to the relevant sections in this
instruction manual.
Volume + and - button
Press to adjust the volume to the desired level.
Info button
Press to display the INFO menu in digital
mode. When watching analogue programmes
press to reveal information such as programme
number etc.
INDEX button
When in digital mode, press to display the
Channel Index menu.
MENU button
Press to enter the menu system of this TV.
Control pad
Use these buttons to navigate through the
menu system of the TV.
Note:
When the MODE button has been set to VCR or
DVD, the control pad operates the main functions of
your VCR or DVD.
MEMORY STICK button
Press to display the Memory Stick menu.
VIDEO TV
GUIDE
0
4 6
7
8 9
1 2 3
5
DIGIT AL MEMORY STICK
MO DE
INDEX
PROG
MENU
/ /
VTR
TV DVD
PROG +/- button
Press to select the next or previous
programme.
OK button
Press to display a list of channels on screen.
Press the
V or v button to scroll through the list
until the channel you wish to view is
highlighted, then press the OK button to display
that channel on screen.
NX9-13.fm Page 9 Monday, September 16, 2002 12:29 PM