Sony DVP-K370 - Manual (Page 16)

16
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord (mains lead) in the order (1~3)
shown below. Be sure to connect the power cord (mains lead) last.
When connecting to a standard 4:3 screen
TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 66.
To change the colour system
The colour system of the player is set to
NTSC or PAL. If the on-screen display of the
player does not appear on the TV, change the
colour system of the player (PAL or NTSC)
so that a picture appears on your TV. To
change the colour system, hold [/1 down for
a few seconds while pressing X on the player.
z Hints
• To check the current setting of the player’s colour
system, press [/1 on the player or remote. The
power indicator lights up in green. When “NTSC”
appears on the front panel display, the colour
system of the player is set to NTSC. When
“NTSC” does not appear, the colour system is set
to PAL.
• When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) 1/2 jacks on the player to
the TV’s video input jack, and connect the LINE
OUT L/R (AUDIO) 1/2 jacks to the TV’s audio
input jack.
PCM/DTS/MPEG
DOLBY DIGITAL
COAXIAL OPTICAL
R
1
2
L
AUDIO VIDEO
DIGITAL OUT LINE OUT S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C B
C R
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
R
1
2
L
AUDIO VIDEO
LINE OUT
to LINE OUT
(VIDEO)1 or 2
to audio input
1 Audio/video
cord (supplied)
2 Power source
to video input
to LINE OUT
L/R (AUDIO)1
or 2
CD/DVD Player
TV
3 Power source
l : Signal flow