Step 2: connecting the audio cords, Select a connection – Sony DVP-K370 User Manual
Page 20
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup
TV
• Surround effects: TVS DYNAMIC (page 52),
TVS WIDE (page 52)
example
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 52)
or
MD deck/DAT deck
• Surround effects: none
example
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 23)
example
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 74),
DTS (5.1ch) (page 74), MPEG audio (5.1 ch)
(page 74)
example
A
D
A
B
C
D