Sony DVP-K370 - Manual (Page 22)

22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
z Hint
In connection , you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
B
B-1
B-2
PCM/DTS/MPEG
DOLBY DIGITAL
COAXIAL OPTICAL
R
1
2
L
AUDIO VIDEO
DIGITAL OUT LINE OUT S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C B
C R
B-2 B-1
PCM/DTS/MPEG
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO VIDEO
LINE OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red) (white)
Coaxial digital
cord (not supplied)
Stereo audio cord
(not supplied)
to audio input to coaxial or optical
digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
l : Signal flow
B-1