Sony DVP-K370 - Manual (Page 24)

24
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are unable to enjoy the surround sound effects of this
player.
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “MPEG” to “MPEG” (page
70).
D
PCM/DTS/MPEG
DOLBY DIGITAL
COAXIAL OPTICAL
R
1
2
L
AUDIO VIDEO
DIGITAL OUT LINE OUT S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C B
C R
D
PCM/DTS/MPEG
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Center
Coaxial digital cord
(not supplied) Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
l : Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital
input
to DIGITAL OUT
(COAXIAL or
OPTICAL)