Select Comfort Precision Comfort Adjustable Foundation - Manual (Page 11)

Precision Comfort™ Owners Manual
11
INSTALLATION
c. Attach one headboard bracket flange
to one of the bracket channels with (2)
bolts/nuts. (
FIGURE 10) Tighten bolts.
Repeat procedure to attach the other
headboard bracket flange.
FIGURE 10: Headboard bracket flange installation (attach one
flange to each of the headboard bracket channels).
USE (2) 1 INCH BOLTS AND
NUTS (TIGHTEN) TO ATTACH
HEADBOARD BRACKET FLANGE
TO EACH BRACKET CHANNEL
ANGLE
BRACE
QUEEN SIZE HEADBOARD BRACKET
ASSEMBLIES ARE SHOWN. TWIN SIZE
HEADBOARD BRACKETS (OR SMALLER)
ARE NOT EQUIPPED WITH ANGLE BRACE
(FIGURES 9 and 10).
NOTE
FIGURE 9: Headboard bracket channel installation (one each
side of the head section of the bed).
SLIDE HEADBOARD
BRACKET CHANNEL OVER
THE FRAME EXTENSION
USE (2) 3 INCH CARRIAGE BOLTS AND
NUTS TO ATTACH EACH BRACKET
CHANNEL TO THE FRAME EXTENSIONS
ANGLE
BRACE