Select Comfort Precision Comfort Adjustable Foundation - Manual (Page 12)

Precision Comfort™ Owners Manual
12
d. Slide headboard bracket assemblies (in
or out) to achieve a distance of 1.5
inches (38.1mm) to 2 inches (50.8mm)
between the edge of the foundation
base and headboard bracket flange
assemblies (
FIGURE 11).
e. Firmly tighten the 3 inch carriage bolts
of both headboard bracket channels.
f. Measure the distance (center-to-
center) between the mounting holes in
the headboard.
g. Measure the center-to-center distance
between the mounting slots of the
headboard bracket flanges (
FIGURE 12).
h. If bracket flange adjustment is required
to accept the headboard, remove the 1
inch headboard bracket flange bolts
and move
flanges side-to-
side for the
adjustment
(
FIGURE 12).
Reinstall bolts
and tighten.
i. Install
headboard.
13. Install mattress on
the foundation.
Typical Precision
Comfort
™ installation
is now complete.
INSTALLATION
FIGURE 12: Headboard bracket measurement and adjustment to accept headboard.
MEASURE FLANGE SL
OTS
CENTER-
TO-CENTER T
O CHECK
HEADBO
ARD HOLE L
OCATION
REMOVE 1 INCH BOL
TS AND REL
OCATE
FLANGES T
O ACHIEVE CENTER-
TO-
CENTER DIST
ANCE REQUIRED FOR
HEADBOARD MOUNTING HOLES
FIGURE 11: Headboard bracket position from the edge of the
foundation base frame.
1.5 to 2 inches
SLIDE BRA
CKET
ASSEMBLIES IN OR
OUT T
O ACHIEVE
POSITION