Samsung BN68-01797A-00 - Manual (Page 37)

English - 
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
This function does not work in DVI-Digital mode.
Preset: Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button.
Press the
ExIT button to exit.
Setting up the TV with your PC
Move Enter Return
Mode : Standard ►
Backlight 7
Contrast 
Brightness 4
Sharpness 0
Auto Adjustment
Screen
►
▼ More
Picture TV
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
Preset: Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Picture", then press the ENTER button.
Press the ▲ or ▼ button to select "Screen", then press the ENTER button.
2. Press the ENTER button to select "Image Lock".
3. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the ExIT button to exit.
0
▲
Coarse
▼
Move Adjust Return
Move Enter Return
Image Lock ►
Position ►
Image Reset
Resolution : 160 x 768 @60Hz
Screen PC
Move Enter Return
Coarse 0
Fine 4
Image Lock PC
Move Enter Return
Mode : Standard ►
Backlight 7
Contrast 
Brightness 4
Sharpness 0
Auto Adjustment
Screen
►
▼ More
Picture TV
Auto Adjustment in progress.
Please wait.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Sound Mode”.
3. Press the ◄ or ►button to select the required option.
4. Press the ExIT or TOOLS button to exit.
Tools
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Auto Adjustment
Move Enter Exit
BN68-01797A-00Eng.indd 35 2008-08-07 �� 2:08:32