Sony VGC-V User Manual
Page 119
119
Troubleshooting
What should I do if a BIOS error appears when my computer starts?
If the message "Press F2 to setup" appears at the bottom of the screen
1
Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears.
2
Press the
,
key to select the Exit menu.
3
Press the
m
key to select Load Setup Defaults.
4
Press the Enter key.
The Load Setup Defaults window appears.
5
Select OK, and press the Enter key.
6
Select Exit (Save Changes), and press the Enter key.
The Save configuration changes and exit now? window appears.
7
Select OK, and press the Enter key. The computer restarts.
If this occurs on a regular basis, contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony
online support Web site.
What should I do if the power indicator (Green) lights but my screen does not display
anything when I turn on my computer?
If nothing still appears on your screen after a while
1
Press the power button for more than four seconds to check that the power indicator goes out. Then turn on your computer
again.
2
If nothing still appears on your screen, unplug the power cord and leave your computer for about a minute. Then plug in the
power cord and turn on your computer again.