Sony VGC-V - Manual (Page 53)

53
n N
Using Your VAIO Computer
To connect in STB mode (Option 1)
1 Connect one end of a TV coaxial cable (1) (optional) to your cable service access (wall outlet) (2). Connect the other end to
the VHF/UHF IN jack on the back panel of your set-top box (STB) (3).
2 Connect a second TV coaxial cable (4) (optional) to the VHF/UHF OUT jack on your STB unit (3). Connect the other end to
the single-connection end of a splitter device (5) (optional).
3 Connect a third TV coaxial cable (6) (supplied) to the double-connection end of the splitter device (5). Connect the other end
to the VHF/UHF port (7) on the computer.
4 Connect a fourth TV coaxial cable (8) (optional) to the double-connection end of the splitter device (5). Connect the other end
to the VHF/UHF port (9) on the rear of your TV monitor or display.