Sony VGC-V - Manual (Page 54)

54
n N
Using Your VAIO Computer
To connect in STB mode (Option 2)
1 Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other end
to the VHF/UHF IN jack on the back panel of your set-top box (STB) (3).
2 Connect a second TV coaxial cable (4) (optional) to the VHF/UHF OUT jack on your STB unit (3). Connect the other end to
the VHF/UHF port (5) on the rear of your TV monitor or display.
3 Connect the double mini-plugs of the audio cable (6) (supplied) to the Composite Audio Out (L/R) jacks (7) on the back panel
of your STB unit (3), matching the jack colors. Connect the single plug end of the audio cable (6) to the Composite Audio In
jack (8) on the computer.
4 Connect one end of the S Video cable (9) (optional) to the Composite Video Out jack (10) on the back panel of your STB unit
(3). Connect the other end of the same S Video cable to the S Video In jack (11) on the computer.