Samsung ML-2010 Series - Manual (Page 40)

U SING P RINT M ATERIALS
3.7
3
Using the Manual Tray
If you select Manual Feed in the Source option, you can
manually load paper in the manual tray. Manually loading paper
can be helpful when you want to check the print quality after
each page is printed.
If you experience a paper jam from the manual tray, load one
sheet of paper at a time into the manual tray.
1
Load the print material in the manual tray with the print
side up.
Adjust the paper guide against the print material without
bending the paper.
2
When you print a document, you must select Manual Feed
for Source from the software application, and then select
the correct paper size and type. For details, see Software
User’s Guide.
3
Press the Cancel button on the printer to start feeding.
Note: If you don't press the button after a pause, the paper will be
automatically fed into the printer.
4
Printing is started.
5
If you are printing multiple pages, load the next sheet after
the first page prints out, and press the Cancel button.
Repeat this step for every page to be printed.