Samsung ML-2010 Series - Manual (Page 42)

U SING P RINT M ATERIALS
3.9
3
•Load transparencies in the manual tray with print side up,
and the top with the adhesive strip going first.
Notes:
• To prevent transparencies from sticking to each other, do not let
the printed sheets stack up as they are printed out.
• Place transparencies on a flat surface after removing them from
the printer.
• Do not use transparencies that are separating from the backing
sheet.
•Load card stock with print side up, short edge first and
center of the manual tray.
Notes: If you experience jams with card stock feeding, turn
the paper around and try again.