Samsung ML-2010 Series - Manual (Page 103)

Advanced Printing
18
4
In the Edit Overlay window, click Create Overlay.
5
In the Create Overlay window, type a name of up to eight
characters in the File name box. Select the destination
path, if necessary. (The default is C:\Formover).
6
Click Save. The name appears on the Overlay List box.
7
Click OK or Yes to finish creating.
The file is not printed. Instead it is stored on your
computer hard disk drive.
N OTE : The overlay document size must be the same as the
documents you print with the overlay. Do not create an overlay
with a watermark.
Using a Page Overlay
After an overlay has been created, it is ready to be printed with
your document. To print an overlay with a document:
1
Create or open the document you want to print.
2
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 6.
3
Click the Extras tab.
4
Select the desired overlay from the Overlay drop-down
list box.
5
If the overlay file you want does not appear in the
Overlay list, click Edit button and Load Overlay, and
select the overlay file.
If you have stored the overlay file you want to use in an
external source, you can also load the file when you access
the Load Overlay window.
After you select the file, click Open. The file appears in the
Overlay List box and is available for printing. Select the
overlay from the Overlay List box.