Sony RDR-GXD310 - Manual (Page 53)

53
Ti
m
e
r Re
co
rd
in
g
3
Select the timer setting you want to check/
change/cancel, and press ENTER.
The sub-menu appears.
4
Select one of the options, and press
ENTER.
“Modify”: Changes the timer setting.
Select an item using
</, and adjust using
M/m.
“Erase”: Erases the timer setting. Select
“OK,” and press ENTER.
“Check Overlap”: Checks for overlapped
settings.
Select “Close” to return to the Timer List.
“Info”: Displays the timer setting information
box along with the disc space required to
record the whole programme (according to the
selected recording mode).
Press O RETURN to come back to the
Timer List.
To change or cancel the setting, repeat steps 3
and 4 above.
When the timer settings overlap
The programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.
When the recordings start at the same time
The programme that is set last has priority. In this
example, timer setting B is set after A, so the first
part of timer setting A will not be recorded.
When the end time of one recording and the
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.
To scroll the list display by page (Page mode)
Press / while the list display is turned on.
Each time you press / , the entire Timer
List changes to the previous/next page of timer
settings.
To turn off the Timer List
Press TIMER LIST or O RETURN.
z Hint
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 47).
b Notes
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. “
” will
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
Modify
Modify the timer setting.
OK
Cancel
Details Date
Mon-Sat
Source Mode Prog. Start
00 :
Stop
15 TV AAB SP : 22 22
22:00-22:15 AAB Mon-Sat
Mode:SP
Erase
Are you sure you want to erase this timer setting?
OK Cancel
Check Overlap
These timer settings overlap.
29.10 20:30-21:30 DEF SP
Close
29.10 21:00-22:00 GHI
Fri
Fri SLP
Information
Mon-Sat 22:30-22:15
AAB
Mode:SP 1.4GB
7:00 8:00 9:00 10:00
A
B will be cut off
7:00 8:00
A
B
9:00 10:00
7:00 9:00 10:00
A
B