Samsung FTQ307NWGX - Manual (Page 21)

02
INDUCTION COOKING
Surface cooking _ 21
3. To set and adjust the power level ( to ) for cooking,
touch the Heat level setting selectors ( or )
For faster adjustment, keep your finger on the Heat level setting selectors ( or )
until the required value is obtained.
If more than one sensor is pressed for longer than 10 seconds, will show in the heat
setting display. To reset, touch the
On/Off control sensor.
POWER BOOST CONTROL
The power boost function makes additional power
available to each cooking zone. (example : bring a large
volume of water to the boil)
The power boost function is activated for a maximum of 10
minutes for each cooking zone.
After Power Boost is finished, the cooking zones automatically
return to power level
In certain circumstances, the Power boost function may be deactivated automatically to
protect the internal electronic components of the induction.
SIMMER CONTROL
The simmer controls are used to simmer and keep
large quantities of foods warm such as stews and soup.
The simmer settings of the small cooking zone(6inch) are ideal
for delicate foods and melting chocolate.
SWITChING ThE APPLIANCE OFF
To completely switch off the appliance, use the On/Off
control sensor.
Touch the On/Off control sensor.
After switching off a single cooking zone or the entire cooking surface, the presence of
residual heat will be indicated in the digital displays of the corresponding cooking zones in
the form of an (for “Hot Surface”).
FTQ307NWGX_XAC DG68-00229A.indb 21 2009-07-13 1:30:42