Care and cleaning of the oven, Oven vent, Cleaning painted parts and decorative trim – Samsung FTQ307NWGX User Manual

Page 52: Cleaning stainless steel surfaces

Advertising
background image

52_ Maintaining your appliance

CARE AND CLEANING OF ThE OVEN

WARNING

Be sure all controls are OFF and all surfaces are COOL before cleaning any

part of the range.

If your range is removed for cleaning, servicing or

any reason, be sure the Anti-Tip device is re-engaged
properly when the range is replaced. Failure to take
this precaution could result in tipping of the range and
cause injury.

Oven vent

Oven vent

The oven vent is located above the

right rear surface unit.

This area could become hot during

oven use.

It is normal for steam to come out

of the vent.

The vent is important for proper air

circulation. Never block this vent.

Cleaning painted parts and decorative trim

For general cleaning, use a cloth with hot and soapy water.

For more difficult residue and built-up grease, apply a liquid detergent directly onto the area and

leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do not use abrasive cleaners on
any of these surfaces; they can scratch.

Cleaning stainless steel surfaces

1. Shake the bottle of Stainless Steel Appliance Cleaner or polish well.

2. Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or damp

paper towel.

3. Clean a small area, rubbing with the grain of the stainless steel if applicable.

4. Dry and buff with a clean, dry paper towel or soft cloth.

5. Repeat as necessary.

Do not use a steel-wool pad; it will scratch the surface.

If a mineral oil-based stainless steel appliance cleaner has been used before to clean

the appliance, wash the surface with dishwashing liquid and water prior to using the
Stainless Steel Appliance Cleaner or polish.

FTQ307NWGX_XAC DG68-00229A.indb 52

2009-07-13 1:31:02

Advertising
This manual is related to the following products: