Smith Corona 200 - Manual (Page 13)

13
ADVANCED OPERATION
There are three advanced modes in your typewriter: AUTO, LP and JUST. The mode is
changed circularly when you press the CODE + 8 (MODE) key. The selection se-
quence is following:
TW AUTO LP JUST TW
AUTO (Automatic Return Mode)
In this mode, the carrier will automatically returned to the left margin every time
the
SPACE bar or the HYPHEN key is pressed in the hot zone.
LP (Line Print Mode)
This mode allows you to print one line at a time. Characters will appear on the display
as you type. This enables you to correct any mis-typed entries on the display. The line
is printed when you press the
RETURN , TAB or CODE + 8 (MODE) key. You can
type in new text while the previous line is being printed.
JUST (Justification)
This mode allows you to justify a line. Characters will appear on the display as you
type. This enables you to correct any mis-typed entries on the display. When you type
a character over the right margin, the entire line is automatically printed out, justified
between the left and right margin, and the carrier returns to the left margin. You can
type new text while the previous line is being printed.
* If you press the TAB or RETURN key while typing on a line, text will be printed
out immediately and will not be justified.
-12-