Smith Corona 200 - Manual (Page 18)

18
TROUBLE SHOOTING
If any operating difficulties arise, check the list below before returning your typewriter
for service.
1. Typewriter remains at a stand with the - Make sure the power cord is still
power switch set to on.
plugged in.
2. Printing is faint or does not appear. - Be sure the printwheel and ribbon
cassette have been properly in
stalled.
- Make sure the ribbon has not been
fully used.
3. Corrections cannot be made. - Check to make sure the correction
tape has been property installed.
- Make sure the correction tape has
not been fully used.
- Make sure the correction tape has
been properly selected.
M A I N T E N A N C E
We recommend that your typewriter be adjusted, serviced, and lubricated by a
qualified service technician at least once a year. If you need help, contact your local
dealer for checking your machine.
* NOTE: For best performance, try to use only standard supplies from your
dealer. The use of non-standard supplies including Ribbons,
Correction Tapes and Print Wheels, may cause poor performance or
damage to your typewriter.
- Please, store your typewriter in a location protected from extreme temperatures
and humidity.
- Be sure to unplug the typewriter before cleaning and lifting it.
- If you’d like to clean your typewriter, use a mild soap to remove stains.
- Never attempt to disassemble your typewriter yourself. Repairs should only be
made by an autorized service technician.
-17-