SIIG 101828 - Manual (Page 17)

Page 13
OPERATING INSTRUCTIONS
Starting the Data Logger
The data logger must be started by the shipper by inserting a ballpoint pen or
other small blunt object into the start switch hole on the front of the data logger.
The green LED will flash rapidly three times to indicate it started. If the green
LED does not flash, press the start switch again. If the data logger still does not
activate after three tries, contact your distributor or DeltaTRAK, Inc., for
technical assistance.
Main Screen Description
With the In-Transit FlashLink Software you can download data, open existing
data files on the computer, manipulate data presentation, create graphs, and print
reports. All functions are customizable and accessible from the main screen.
Double click on the FlashLink icon “EFLIT” or “Flit” to start the program.
Click to
download
data from a
data logger
Click to open
an existing data
file on the
computer.
The Help Line
provides prompts
when the cursor is
placed over an
object.
Menu Click to open
Setup Window
Click to close pop-up window and
either open an existing data file or
download data from data logger