SIIG 101828 User Manual
Page 35
Page 31
ERROR AND
WARNING MESSAGES
WHAT THEY MEAN
FlashLink Not Accessible! This message appears when there is no
connection between PC and the data
logger.
Check for good contact between the data
logger, cable, and computer.
Use only a 25-pin “male-female” extension
cable
Check the parallel port settings on your
computer.
Note: Only the following parallel port
settings are recognized. Search order is-
Basic configuration 0000 = 0378-037F
Basic configuration 0001 = 03BC-03BF
Basic configuration 0002 = 0278-027F
If you continue receiving this message,
contact DeltaTRAK, Inc. Technical
Support for further assistance.
No Available Data!
This message appears when you try to
download the data logger and logging
hasn’t started or no data points are
recorded. This also occurs if the data
logger is waiting for manual start.