Silicon Optix Open Eye Pro-Pack Dome Camera CM-525P - Manual (Page 10)

27104AF
10
Features
This OpenEye OPTIX Pro-Pack Dome Camera is the building block for any surveillance/security system. By using
multiple Pre-Packaged dome cameras, no place is too large for monitoring. Extensive and flexible architecture
facilitates remote control functions for a variety of external switching devices such as multiplexers and DVRs.
A. CAMERA UNIT
• Built in 25X Optical Power Zoom Camera with True Day & Night Function
• 999 ID & 319 Preset Position
• 8 Tours consist of Preset Tour, Auto Scan and Pattern. Tour itself can be programmed with over 300 functions and
Preset locations. While moving, each preset scan be watched in smooth Vector Scan mode.
• 8 Auto Scan, including Vector Scan
• 4 Pattern (240 Seconds)
• 8 Privacy Zones
• 8 Alarm Inputs / 4 Alarm Outputs (NC & NO)
• Variable speed from 0.1/sec to 90/sec
• Turbo speed is Max 360/sec with Ctrl pressed
• Maximum speed is inversely proportional to the zoom ratio
• Programmable user preferences (Alarm, Preset, Title, etc..)
• Up to 999 selectable camera addresses (4095 Optional)
• Built in RS-485/422 receiver driver
• Built in Power Surge Protection and Lightning Protection
• Bubble dome with black inner shield for concealing the camera
1. INTRODUCTION
Power Consumption
• OpenEye Optix Power Consumption:
850mA 24VAC (20W)
• Camera with Outdoor Housing (Pre-Packaged)
Max Power Consumption: 68W (2,850mA 24VAC)
Higher than 24VAC 3A spec Power Adapter is required for Camera + Outdoor housing
• Outdoor Housing Power Consumption:
Cooler: 50mA 24VAC (1.2W) * 2 = 2.4W
Heater: 1,000mA 24VAC (24W) * 2 = 48W