Silicon Optix Open Eye Pro-Pack Dome Camera CM-525P - Manual (Page 25)

27104AF
25
4. PTZ SETUP MENU
4.2 SYS INFO
The OpenEye OPTIX Camera’s set up menu provides essentiaI information about the dome camera if service is
required. When you view this screen, you can determine the camera type and ROM version. The information on this
screen can't be modified.
For the multi-protocol, please refer to the multi-protocol selection guide. If you want to use other protocols, consult
with your local distributor.
Note : If you want to go to the previous mode, select the CLR/ESC key. To exit main MENU without saving, select the
MENU button. To exit and save the options, select the save button (OpenEye OPTIX protocol only)
HOME
SYS INFO
DISPLAY
DOME SETUP
ALARMS
--- OpenEye OPTIX PRE-PACK ---
CAMERA
CONFIG
LANGUAGE
EXIT
SYSTEM INFORMATION
CAMERA TYPE
H/W VERSION
S/W VERSION
PROTOCOL
COMM. MODE
BAUD RATE
---------------------------------------------------------
EXIT : (CLR) KEY
: 25XD / NTSC
: VI. 03P
: VI. 44P
: OPENEYE OPTIX
: RS485
: 9600
------------------------------------------------------------------