Silicon Optix Open Eye Pro-Pack Dome Camera CM-525P - Manual (Page 43)

27104AF
43
4. PTZ SETUP MENU
4.8 CONFIG
A. INIT DATA
1. INIT. ALL
Erase all stored data from the Flash ROM of the selected dome camera (Factory Default). You will then
be asked to enter Yes or No. If you intend to erase all data then press the ENT/HOME Key, otherwise
press the CLR/ESC key to exit without erasing. The erased data includes all stored data (Titles, Presets,
and Tours).
HOME
SYS INFO
DISPLAY
DOME SETUP
ALARMS
--- OpenEye OPTIX PRE-PACK ---
CAMERA
CONFIG
LANGUAGE
EXIT
INIT DATA
DOME RESET
GENERAL
INIT. ALL(FACTORY)
INIT. CAMERA
INIT. AREA TITLE
INIT. PRIVACY ZONE
INIT. PRESET
INIT. TOUR
INIT. PATTERN
INIT. SCAN
SAVE EXIT
INIT DATA SETUP
1 ON/OFF
CONTINUE?
YES: HOME/ENT
NO: CLR
INIT. ALL(FACTORY)
INIT. CAMERA
INIT. AREA TITLE
INIT. PRIVACY ZONE
INIT. PRESET
INIT. TOUR
INIT. PATTERN
INIT. SCAN
SAVE EXIT
INIT DATA SETUP
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
:OFF
INITIALIZING DATA ...