Sennheiser EK3253 - Manual (Page 22)

24
Adjustment tips for the operating
menu
Selecting a channel – CHAN
Via the “ CHAN ” menu, you can switch between the channels in the
channel banks “F” (fixed bank) or “U” (user bank). The channel
bank “F“ has up to 16 switchable channels that are factory-preset
to customer-specific receiving frequencies. These frequencies
cannot be changed.
The channel bank “U” also has up to 16 switchable channels to store
frequencies that are freely selectable within the preset frequency
range.
Always set the transmitter and the receiver of a transmission link to
the same channel. After scanning the channel bank (see “Scanning
the channel bank for free channels – SCAN” on page 25), only the
free channels are displayed. Set the transmitter to one of the free
channels.
Selecting the frequencies to be stored in the
channel bank “U” –
TUNE
Via the “ TUNE ” menu, you can freely select the frequencies to be
stored in the channel bank “U” (user bank).
̈
Press the SET button to get into the setting mode of the “ TUNE ”
menu.
Note:
When pressing the SET button for one second, you can use the
̆
/
̄
rocker button to select a different channel for which you
can then change the frequency.
When you have selected the channel bank “F” and then select the
“
TUNE ” menu, the receiver automatically switches to channel 01 of
the channel bank “U”
̈
Press the
̆
/
̄
rocker button to select the desired receiving
frequency. Receiving frequencies are tunable in 5-kHz steps
within a switching bandwidth of 36 MHz max.