Modulation display of the received transmitter, Mute” display – Sennheiser EK3253 User Manual
Page 9
11
Red LED lit up:
The receiver is switched on and the capacity
of the batteries/accupack is sufficient.
Red LED flashing: The batteries are/the accupack is going flat
(LOW BAT)!
In addition, the 4-step battery status display
ብ
on the display
panel provides information on the remaining battery/accupack
capacity:
3 segments:
capacity approx. 100 %
2 segments:
capacity approx. 70 %
1 segment:
capacity approx. 30 %
Battery icon flashing:
LOW BAT
Modulation display of the received transmitter
The level display for audio signal “AF” shows the modulation of
the received transmitter. When the transmitter’s audio input
level is excessively high, the level display for audio signal “AF”
shows full deflection.
“MUTE” display
The “MUTE” display
ቨ
appears on the display panel when the
RF signal of the received transmitter is too weak.
ቨ