Sennheiser EK3253 - Manual (Page 26)

28
Selecting the standard display – DISLPY
Via the “ DISPLY ” menu, you can select the standard display:
Entering a name – NAME
Via the “ NAME ” menu, you can enter a freely selectable name
for the receiver. You can, for example, enter the name of the
performer for whom the adjustments have been made.
This name can be displayed on the standard display and can
consist of up to six characters such as:
y letters (without pronounciation marks),
y numbers from 0 to 9,
y special characters and spaces.
To enter a name, proceed as follows:
̈
Press the SET button to get into the setting mode of the
“ NAME ” menu. The first segment starts flashing on the
display.
̈
With the
̆
/
̄
rocker button you can now select a
character. By briefly pressing a button, the display jumps
either forwards or backwards to the next character. If you
hold down a button, the display starts cycling continuously.
Selectable standard display Contents of standard
display
“FREQ”
“NAME”
“CHAN”