Samsung DIGIMAX i50 - Manual (Page 103)

《103》
Quick view
■ If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is
possible only with still images.
● Setting Quick View
1. In any mode with the exception of Voice Recording and
MP3 mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Quick View] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Off] : The quick view function can’t be activated.
[0.5, 1, 3sec] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
Initialisation
■ All camera menu and function settings will be restored to their default values.
However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.
● Initialising the Camera
1. In any mode with the exception of Voice Recording and
MP3 mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup] menu
tab.
3. Select the [Reset] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [No] is selected : Settings will not be restored to their defaults.
If [Yes] is selected : All settings will be restored to their defaults.
USB
AF Lamp
LCD
Video Out
Quick View
Off
0.5 sec
1 sec
3 sec
Setup
Back:◀ Set:OK
AF Lamp
LCD
Video Out
Quick View
Reset
No
Yes
Setup
Back:◀ Set:OK