Samsung DIGIMAX i50 - Manual (Page 89)

《89》
PictBridge
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
■ Connecting the Camera to a Printer
● Using the USB cable with Cradle :
Connect the camera and the cradle. Connect the cradle to a printer’s USB port with the
supplied USB cable.
● Using the USB cable with Camera :
Connect the camera to a printer’s USB port with the supplied USB cable.
● Setting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select [Setup] menu
tab.
3. Select [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select [Printer] menu by pressing the UP/ DOWN button
and press the OK button.
※ If you selected [Computer] in Step 4, when you connect the camera to your printer, the
[Connecting Computer] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
■ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
Format
Date&Time
Imprint
Sound
USB
Computer
Printer
Setup
Back:◀ Set:OK