Samsung DIGIMAX i50 - Manual (Page 99)

《99》
Sound
Connecting an External Device (USB)
■ If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
● Setting Operation Sounds
1. In any mode with the exception of Voice Recording and
MP3 mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Sound] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Sound] sub menu : Off/ Low/ Medium/ High
5. Press the menu button twice and the menu will disappear.
■ You can select an external device to which you want to connect the camera using the USB
cable.
● Selecting an External Device
1. In any mode with the exception of Voice Recording and
MP3 mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Computer] : Select this if you want to connect the camera to your PC.
Refer to page 136 for instructions on how to connect the camera to your PC.
[Printer] : Select this if you want to connect the camera to your printer.
Refer to page 89 for instructions on how to connect the camera to your
printer.
5. Press the menu button twice and the menu will disappear.
Language
Format
Date&Time
Imprint
Sound
Off
Low
Medium
High
Setup
Back:◀ Set:OK
Format
Date&Time
Imprint
Sound
USB
Computer
Printer
Setup
Back:◀ Set:OK