Sunbeam FP5900 - Manual (Page 18)

16
On-screen display (OSD) controls
The settings adjustable with the user controls are viewed through the On-
Screen Display (OSD). Press any of the OSD buttons to activate the OSD.
The LCD monitor needs
time to become thermally
stable the first time you turn it on
each day. Thus, to achieve more
accurate adjustments for
parameters, allow the LCD
monitor to warm up (be On) for
at least 15 minutes before
making any screen adjustments.
Initial appearance of OSD
OSD functions
OSD Icon Description
Sub-
menu(s) Controls and
Adjustments(Analog)
Controls and
Adjustments(Digital)
BRIGHTNESS
Adjusts brightness Same as Analog
CONTRAST
Adjusts contrast Controls Locked
IMAGE LOCK
The image lock function is used to
adjust the level of noise in the
video signal which causes
horizontal lines or areas on the
screen where the image appears
to be unstable and jitters or
shimmers. This can be done
automatically or manually. AUTOMATIC Automatic adjusts the
monitor.
Controls Locked
T84H_setup0915_final.fm Page 16 Monday, September 25, 2000 7:40 PM