Sunbeam FP5900 User Manual
Page 26
24
Screen is blank
and power
indicator is
flashing amber
every 0.5 or 1
second
The monitor is
in the Power
Management
Suspend or
Off state
Press any key on the
keyboard or move the
mouse to restore
operation.
Check the Power
Management software on
your computer.
Power
Management
section on
page 19
Image appears
to be smeared
There are
noises in the
video signal
Select IMAGE LOCK
menu in the OSD. Then
select MANUAL to adjust
FINE/COARSE settings.
User
controls
section on
page 15
Image appears
to be
discolored
The Color
setting may
be incorrect
Adjust the Color
settings.
User
controls
section on
page 15
A few dots are
missing,
discolored, or
inappropriately
lighted.
The LCD contains over 2,300,000 thin-
film transistors (TFTs). A small number of
missing, discolored, or lighted dots may be
present on the screen, which is an intrinsic
characteristic of the TFT LCD technology
and is not an LCD defect.
Problem
Possible
Cause
Suggested Action
Reference
Power consumption
figures are for the monitor
and the power supply
combined.
T84H_setup0915_final.fm Page 24 Monday, September 25, 2000 7:40 PM