SUUNTO n6HR - Manual (Page 27)

27
3.8. ALARMS
Suunto n6
HR
has three separate alarms that you can set to remind you about specific
events or to wake you up in the morning.
To set and activate alarms:
1. Enter the Alarms mode.
2. Select a suitable alarm with PREVIOUS and press ENTER.
3. Set the alarm either On or Off with PREVIOUS and press
ENTER.
4. Set the minutes and hours (and am/pm on the 12h mode)
with PREVIOUS and press ENTER.
Suunto n6
HR
sounds the alarm and displays an illuminated
alarm message (see below) for 30 seconds at the set time.
The message automatically disappears after 30 minutes. You
can dismiss the alarm by pressing any of the Suunto n6
HR
buttons.