SUUNTO n6HR - Manual (Page 36)

36
6. SETTINGS
You can adjust all the settings of your Suunto n6
HR
in the
Settings mode, which is divided into four categories: Date, Time,
General, and Units. If you are receiving a broadcast signal and
the radio is turned on, you cannot set the time and date
manually. Those are set by the network. In this case, your
Suunto n6
HR
automatically receives the correct time from an
atomic clock.
To go to the Settings mode:
1. Long press CHANNEL/MODE to go to the Time channel. Wait for the watch face
to appear.
2. Press CHANNEL/MODE to open the Time splash screen.
3. While the Time splash screen is visible, scroll to Settings with PREVIOUS and
press ENTER. The Settings mode’s main display opens.
6.1. DATE
Suunto n6
HR
has a programmed calendar until the year 2049.
The day is automatically updated according to the set date and
year. Also, if network coverage is present and transmission has
been received, the date will be updated automatically. However,
you can also set the date manually.
To set the date:
1. In the Settings mode, select Date.
2. Set the month, day and year with NEXT/STOP or PREVIOUS, and accept the
selections with ENTER. The weekday on the bottom row will be updated
automatically according to your settings.