Sterling SDF 250 - Manual (Page 48)

SDF 250/400/500
Maintenance 5-11
STT 60 - 1600
Open the cleaning opening of the drying hopper: Lift and turn the handle (A) to open the lock, if
in use: remove before the single conveyor (STT 400 - STT 1600: 2 handles).
Clean the drying hopper.
Close the cleaning opening of the drying hopper: Turn the handle (A) until the cleaning opening is
locked and then close the handle (if in use: re-mount the single conveyor).
F
Remove any granules remaining in the cleaning opening.
STT 1200 and STT 1600: Clean the bead.
A