Sony XB88AV - Manual (Page 11)

11
To tune in a station with a weak
signal
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
TUNING +/– to tune in the station.
To change the preset number
Start over from step 1.
To change the AM tuning interval
(Except for the European and the
Middle Eastern models)
The AM tuning interval is factory-preset to 9
kHz (10 kHz in some areas). To change the
AM tuning interval to 10 kHz (or 9 kHz),
press TUNER/BAND repeatedly until “AM”
appears first, then turn off the system. While
holding down ENTER/NEXT, turn the
system back on. When you change the
interval, the AM preset stations will be
erased. To reset the interval, repeat the same
procedure.
Note
The preset stations are canceled when you
disconnect the power cord or if a power failure
occurs for half a day.
Connecting
optional AV
components
To the audio output of the TV/VCR
To enhance your system, you can connect
optional components. Refer to the
instructions included with each component
for details.
Connecting a TV/VCR
You can connect a TV and VCR to enjoy
Dolby Pro Logic Surround encoded videos
and TV programs.
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected TV/VCR, press FUNCTION
repeatedly until “VIDEO” appears.
continued