Sony XB88AV - Manual (Page 15)

15
Basic Operations
To
Stop playback
Pause
Select a track
Find a point in
a track
Select a CD
Play only the
CD you have
selected
Play all CDs
Remove or
change the
CDs
Adjust the
volume
* AMS: Automatic Music Sensor.
Tips
• Pressing · while the system is off automatically
turns on the system and starts CD playback if
there is a CD on the tray (One Touch Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing ·
or one of the DIRECT PLAY buttons (Automatic
Source Selection).
• If there is no CD in the player, “NO DISC”
appears in the display.
• You can change the CD in the loading position
during playback.
Do this
Press p.
Press P. Press again to resume
playback.
During playback or pause, turn
the jog dial clockwise (to go
forward) or counterclockwise (to
go backward) and release it when
you reach the desired track.
Or press AMS* + (to go
forward) or AMS* = (to go
backward) on the remote.
Press and hold ) or 0 during
playback, and release at the
desired point.
Press one of the DIRECT PLAY
buttons.
Or press DISC SKIP (or press
D.SKIP on the remote).
Press 1/ALL DISCS repeatedly
until “1 DISC” appears.
Press 1/ALL DISCS repeatedly
until “ALL DISCS” appears.
Press 6 OPEN.
Turn VOLUME (or press
VOLUME +/– on the remote).
Recording a CD
— CD Synchro Recording
This function lets you record from a CD to a
tape easily. You can use TYPE I (normal) or
TYPE II (CrO
2
) tapes. The recording level is
adjusted automatically.
1
Press 6 EJECT and insert a blank
tape into deck B.
2
Press 6 OPEN and place a CD.
ª ª
6
P r
0 )
6
ª
P p
ª ª
p
6
0 ) p
) 0
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
With the side you want to
record on facing forward
ª ª
6
P r
0 )
6
ª ª
p 0 ) p
1 2
5
6
7
3
p DSP
DOLBY NR
p
ª
4
continued
1/u
(Power)