Sony XB88AV - Manual (Page 12)

12
Connecting audio
components
Connecting a turntable
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected turntable, press FUNCTION
repeatedly until “PHONO” appears.
Note
Using the turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
be picked up by the needle of the turntable, and
produce the distortion or howling. To avoid this, do
the following:
1
Keep some distance between the speakers and the
turntable.
2 Stop using the surround effect.
3 Install the speakers or the turntable on a firm and
stable surface.
4 Press DBFB repeatedly until “DBFB ”
disappears from the display (LBT-D890AV/
XB55AV only).
Press SUPER WOOFER repeatedly until the
indicator on this button goes off (except for LBT-
D890AV/XB55AV).
To the audio output of the turntable
Connecting optional AV
components (continued) Connecting an MD deck for digital
recording (except for LBT-D890AV)
You can record a CD to an MD digitally by
connecting your MD deck using an optical
cable.
Connecting an MD deck for analog
recording (except for LBT-D890AV)
Be sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until “MD” appears.
Note
If you cannot select “MD” by pressing FUNCTION,
press 1/u (power) while pressing FUNCTION
when the power is turned off. “VIDEO” will be
switched to “MD.” To return to “VIDEO,” do the
same procedure.
To the digital input of the MD deck
To the audio outputs
of the MD deck To the audio inputs of
the MD deck