Sony XB88AV - Manual (Page 17)

17
Basic Operations
n
n
n
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n MW n LW
4 band model:
FM n MW n LW n UKV*
* When you select this band, “STEREO
Plus” appears in the display.
2
Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
MANUAL n AUTO n PRESET
3
Press TUNING +/– to tune in the
desired preset station.
To Do this
Turn off the radio Press 1/u (power).
Adjust the volume Turn VOLUME (or press
VOLUME +/– on the
remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until “MANUAL” appears, then press
TUNING +/– to tune in the desired station.
Preset number
Frequency
DISC ALL
DOLBY NR
OFF
PRESET
TUNED
STEREO
MHz S
Tips
• Pressing TUNER/BAND while the system is off
automatically turns on the system and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• If an FM program is noisy, press STEREO/
MONO so “MONO” appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.