Listening to an externally connected device, Listening to an externally connected, Device – Sony Ericsson NAS-C5E User Manual

Page 29

Advertising
background image

2

GB

NAS-C5E GB 3-280-821-12(1)

Oper

ation

Tip

If the unit is turned off and enters standby mode

while still receiving a radio broadcast, the station is

saved and appears again the next time you turn on the

unit.

To update Live365 and SHOUTcast

information

Select [Update info] while the list of radio stations

is displayed.

The unit searches for new stations and an updated

radio station list appears.

Other operations

To

Do the following

Pause reception of

a radio broadcast

Press . Press  again

to resume the broadcast.

Change the radio

station

Press / on the

remote control repeatedly

(only when a Live365

station is selected). Or press

to go back to the radio

station list and select a

station again.

Listening to an externally

connected device

You can listen to the playback sound from an

external portable audio device (such a

“WALKMAN”) connected to the AUDIO IN jack

on the unit. The playback sound is output from

the unit’s speakers.

Note

Make sure to turn down the volume of the unit,

otherwise the large sound output may cause damage

to the unit’s speakers.

1

Connect an external device to the

AUDIO IN jack on the front of the unit.

2

Press AUDIO IN.

The unit changes to the Audio In

function.

3

Start playback on the externally

connected device.

The playback sound is output from the

unit’s speakers.

4

Press VOLUME + or – to adjust the

volume.

Tip

If the sound volume of the connected device is too

high or too low, you can change the input level on the

unit (page 34).

Note

You cannot operate the externally connected device

from this unit.

Advertising