Sony FX52L - Manual (Page 13)

13
Location and Function of Controls
O
v
er
vi
ew
h ENTER key
Enters the settings of items in the menu
system.
i RESET key
Resets the value of an item back to its
factory preset value. This key functions
when the menu or a setting item is
displayed on the screen.
a INPUT A connectors (HD D-sub
15-pin, female)
Connects to the monitor output on a
computer.
b INPUT B connector (RGB (DVI))
(DVI-D)
Connects to a computer equipped with
DVI (digital) output connector with a
DVI cable.
c INPUT C connectors
5BNC input connectors (R/R-Y/P
R
, G/
Y, B/B-Y/P
B
, SYNC/HD, VD
connectors) (BNC type): Connect to a
high-resolution computer or VCR where
signals are transmitted long distances;
for example, when the projector has
been hung from the ceiling.
According to the connected equipment,
computer, component (R-Y/Y/B-Y),
HDTV or DTV (DTV GBR, DTV
YP
B
P
R
) signal is selected.
d NETWORK connector (RJ-45)
Connect to a computer on the same LAN
with the LAN cable when you use the
networking function of this projector.
For safety, do not connect the connector
for peripheral device wiring that might
have excessive voltage to this port.
Follow the instructions for this port.
Connector Panel
CAUTION
INPUT C
R/R-Y/P
R
INPUT A
RGB
INPUT B
DVI-D
NEWTWORK
B/B-Y/P B G/Y SYNC/HD
MONITOR OUT
VIDEO IN
VIDEO OUT
S VIDEO VIDEO
TRIG
RS-232C
PLUG IN POWER CONTROL S
VD
4 5 7 1
8 9 0 3
6 2