Sony FX52L - Manual (Page 49)

49
Specifications
Oth
e
rs
B Others
Specifications
Optical characteristics
Projection system
3 LCD panels, 1 lens, 3 primary
color shutter system
LCD panel 1.3-inch TFT SONY LCD panel
with micro-lens array 2,359,296
pixels (1,024
× 768 pixels × 3)
Lens 1.3 times zoom lens (powered)
f 50.8 to 64.0 mm/F 1.7 to 2.0
* The lens for VPL-FX52L are
not supplied.
Lamp 300 W
Projection picture size
Range: 40 to 300 inches (diagonal
measure)
Light output ANSI lumen
1)
6,000 lm
Projecting distance (Floor Installation) of VPL-
FX52 (with standard lens)
40-inches: 1490 to 1820 mm
(4.9 to 6 feet)
60-inches: 2280 to 2780 mm
(7.5 to 9.1 feet)
80-inches: 3060 to 3740 mm
(10.0 to 12.3 feet)
100-inches: 3850 to 4700 mm
(12.6 to 15.4 feet)
120-inches: 4630 to 5660 mm
(15.1 to 18.6 feet)
150-inches: 5810 to 7100 mm
(19.1 to 23.3 feet)
180-inches: 6980 to 8540 mm
(22.9 to 28.0 feet)
200-inches: 7770 to 9500 mm
(25.5 to 31.2 feet)
250-inches: 9730 to 11900 mm
(32 to 39.0 feet)
300-inches: 11690 to 14300 mm
(38.4 to 46.9 feet)
1) ANSI lumen is a measuring method of
American National Standard IT 7.228.
Electrical characteristics
Color system NTSC 3.58 /PAL/SECAM/
NTSC 4.43 /PAL-M/PAL-N
system, switched automatically/
manually
Resolution 750 horizontal TV lines (Video
input)
1,024
× 768 dots (RGB input)
Acceptable computer signals
1)
fH: 19 to 92 kHz
fV: 48 to 92 Hz
(Maximum input resolution
signals: UXGA 1,600
× 1,200
fH: 75kHz, fV: 60Hz)
1) Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Compatible video signal
15k RGB 50/60Hz,
Progressive Component 50/60Hz
DTV (480/60I, 575/50I, 1,080/
60I, 480/60P, 575/50P, 1,080/
50I, 720/60P, 720/50P, 540/
60P), Composite video, Y/C
video
Input/Output
VIDEO INPUT
VIDEO: BNC type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p ±2 dB (PAL)
(75 ohms terminated)
VIDEO OUT VIDEO: Loop-through BNC type
Loop-through output from the
VIDEO IN connector
S VIDEO: Loop-through mini
DIN 4-pin type (male)
Loop-through output from the S
VIDEO IN connector
INPUT A Analog RGB: HD D-sub15-pin
(female)
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync: 1 Vp-p ±2 dB sync
negative (75 ohms terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
SYNC/HD:
Composite sync input: 1-5 Vp-p
high impedance, positive/
negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative