Sony FX52L - Manual (Page 24)

24
Projecting
4
Press the INPUT key to select the input source.
Smart APA (Auto Pixel Alignment) adjusts the picture of the connected
equipment so that it is projected clearly.
• If “Auto Input Search” is set to “On”, the projector searches for the signals from
the connected equipment and displays the input channel where the input signals
are found.
For details, see “Auto Input Search” in the SET SETTING menu on page 34.
• The smart APA is effective for the analog input signal from a computer only.
5
Switch the equipment to be connected to output to the projector.
Depending on the type of your computer, for example a notebook, or an all-in-
one LCD type, you may have to switch the computer to output to the projector
by pressing certain keys (e.g.,
, etc.), or by changing your
computer’s settings.
The key for switching the computer to output to the projector varies depending on
the type of a computer.
6
Press the LENS key on the Remote Commander or LENS CONTROL key
on the control panel repeatedly to display “LENS FOCUS.” Then press the
arrow keys to adjust.
To input from Press INPUT to display
Computer etc., connected to the INPUT A connector INPUT A
Computer etc., connected to the INPUT B (digital)
connector INPUT B
Computer etc., connected to the INPUT C connector INPUT C
Video equipment connected to the VIDEO input
connector VIDEO
Video equipment connected to the S VIDEO input
connector S VIDEO
Notes
Note
VGA LCD / / ,
F7 Fx
Fn
or
and